BEFORE YOU START

Make Sure You Have the Right Parts

Most feather flag setups use the same basic components. Your exact hardware may vary by flag size and mounting surface.

Your Printed Flag

Confirm the flag size matches the pole kit you plan to use.

Pole Sections

Lay the pole pieces out from the thickest section to the flexible tip.

Base or Ground Stake

Choose hardware that matches the surface where the flag will stand.

Optional Water Weight

Use additional ballast where compatible and where extra stability is needed.

SET UP WITH CONFIDENCE

Installation Guide

Everything you need to assemble, secure, and position your feather flag correctly — from pole setup to choosing the right base.

Start Installation Need Help? Contact Us

STEP-BY-STEP

How to Install Your Feather Flag

STEP 01

Assemble the Pole

Connect the pole sections from the thickest section upward toward the flexible tip. Make sure each section is fully seated before moving to the next piece.

STEP 02

Slide the Flag Onto the Pole

Feed the flexible pole tip into the flag sleeve and carefully slide the fabric down the pole. Continue until the pole reaches the reinforced pocket at the top of the flag.

STEP 03

Secure the Flag

Check that the pole tip is seated in the top pocket, then secure the bottom of the flag using the supplied tension cord, loop, clip, or attachment point for your pole set.

STEP 04

Place the Pole Into the Base

Position your ground stake or base first, make sure it is stable and upright, then insert the assembled flagpole into the base spindle. Check the entire setup before leaving it unattended.

CHOOSE THE RIGHT SUPPORT

Which Base Should You Use?

Ground Stake

Best for: grass, soil, dirt, and other penetrable outdoor surfaces.

Set the stake firmly into stable ground before inserting the flagpole.

Cross Base

Best for: concrete, pavement, indoor floors, and hard flat surfaces.

Add a compatible water weight where recommended for extra stability.

Square / Heavy Base

Best for: locations where a lower-profile weighted base is preferred.

Keep the base flat and use only hardware compatible with your flagpole system.

CARE & SAFETY

Keep Your Flag Looking Better, Longer

A few simple checks can help protect the flag, pole, and base during everyday use.

Check the Weather

Take flags down during storms, severe weather, or unusually high winds.

Keep Clear of Hazards

Do not install where the pole could contact overhead lines, vehicles, doors, or moving equipment.

Inspect the Hardware

Check pole joints, tension points, and the base regularly for looseness or damage.

Store It Properly

When not in use, allow the flag to dry and store the fabric and hardware in a clean, dry place.

Common Question

Frequently
Asked Questions

Can’t find what you’re looking for? Contact our support team for personalized assistance with your custom order and design requirements

Each shape serves a different purpose. Feather Flags are tall and attention grabbing, Teardrop Flags maintain a clean, tensioned shape, and Rectangle Flags offer more printable space for larger logos or longer messages. Your location, viewing distance, and design will help determine which style suits you best.

Yes, if your existing pole and base are compatible, you can order just the printed flag rather than a full kit. This is useful for seasonal promotions or design updates since you’re only paying for the new print, not the hardware again.

Bulk pricing may be available for larger quantities, depending on the order. If you need multiple flags for several locations, events, or a larger campaign, contact the team for current volume pricing.

Custom options may be available beyond the standard sizes and shapes listed on the website. If you need something specific, contact the team with your required dimensions or design idea so they can confirm what is possible before you place the order.

If your order arrives damaged or there is an issue with the finished product, contact customer support as soon as possible with details and photos of the problem. The appropriate solution can then be arranged based on the issue and your order.

Shipping availability depends on the destination and current shipping policy. Check the shipping information for your location or contact customer support before ordering if you are unsure whether delivery is available to your country.

Still Need Help With Your Setup?

Our team can help you identify the right pole, base, or replacement hardware for your flag setup.